Taihou Kinzoku
JapaneseHIGHDetachable Waterstop Board(High Water Pressure)
Features
・Minimal restrictions on installation conditions, offering high versatility.
・Panels are made of aluminum extruded material for reduced weight.
・Simply turning the Gremon handle applies simultaneous pressure sealing to the sides and bottom.
・Intermediate posts allow use at wide openings.
・Gremon operation can be selected from either the inside or outside.
・For high panel heights, scaffolding such as work platforms may be required.
・Available with or without a bottom frame (proposal provided based on floor conditions).
・Angled intermediate posts can also be manufactured.
・Four-sided waterstop configuration is also available.
Specifications
| Panel | Aluminum extruded material, thickness 60 mm, silver finish |
|---|---|
| Side Frames / Intermediate Posts | Stainless steel |
| Manufacturable Size Range | Width: 400 mm and above (no upper limit)／Height: 350 mm to 1000 mm (custom sizes available) |
| Flood Prevention Performance | Equivalent to WS-6 (JTCCM Class 5 certified) |
| Panel Weight | Approx. 12 kg per meter (H 360 mm) |
| Operation Method | Manual |
| Installation Time | Approx. 5 minutes (varies depending on storage location and number of panels) |
| Storage | Storage space required for panels and intermediate posts. |
| Options | Drain pipes, wall hooks, storage box, hand truck, etc. |
Reference Values
| Flood Height | Recommended Number of Tiers | Maximum Post Spacing |
|---|---|---|
| 2500mm | 7tiers | 1900mm |
| 2000mm | 6tiers | 2050mm |
| 1800mm | 5tiers | 2100mm |
| 1500mm | 4tiers | 2250mm |
| 1200mm | 3tiers | 2400mm |
※Maximum post spacing can be customized by adding reinforcement inside the panel.
※For high panel installations, scaffolding may be required.
